Dymarch Limited is a CNC and conventional machining company in Foleshill, Coventry. It runs CNC vertical and horizontal machining centres (Microcut, Mazak, Hurco and Milwaukee, with fourth axis on three of them) and five CNC lathes, including a Doosan Lynx 2100B and Mori Seiki SL4 with live tooling. Parts are programmed in CAD/CAM using high-speed tool paths, and the company also provides conventional machining, internal and surface grinding, honing, laser marking and engraving. Work includes castings, forgings and bar stock in aluminium, cast iron and steel for the automotive, building and heat exchange sectors.
CNC Milling
CNC Turning
3D Printing
E & A Tooling Limited
Bognor Regis, West Sussex
E & A Tooling Ltd is a precision engineering company based in Bognor Regis, West Sussex, trading for over 35 years. The company offers CNC milling and turning, precision toolmaking, jigs & fixtures, and power press production from an ISO 9001-accredited facility, positioning itself as a UK alternative to overseas manufacturing placements.
CNC Milling
CNC Turning
Sheet Metal Fabrication
Prototyping
E M Precision Limited
Jarrow, Tyne and Wear
New
E M Precision Limited is a subcontract machining company in Jarrow, Tyne and Wear, specialising in milling and turning on CNC machines. It runs four Hurco machines: a VM20i and a VM30i vertical machining centre and two TM8i XP turning machines. The company produces one-off components and batchwork production.
CNC Milling
CNC Turning
E.J. Mansbridge (Engineering) Limited
High Wycombe, Buckinghamshire
New
E.J. Mansbridge (Engineering) Limited is a CNC machining company at Cressex Business Park, High Wycombe, Buckinghamshire, trading since 1974. It runs CNC vertical machining centres (Hurco and Hardinge Bridgeport, including 5-axis machines) and CNC turning centres, alongside manual lathes. Work ranges from one-off prototypes to small and medium batches in aluminium, steel, stainless steel, brass, copper and plastics. An Aberlink CMM is used for inspection, first article inspection reports are supplied, and the company holds ISO 9001:2015.
CNC Milling
CNC Turning
5-Axis Machining
Prototyping
Edgerton Gears Limited
Ossett, West Yorkshire
Edgerton Gears Limited (trading as Edgerton Precision Engineering) is a precision engineering and gear-cutting company based in Ossett, West Yorkshire. It offers CNC milling and CNC turning, conventional turning and milling, fitting and assembly, and gear cutting and manufacture (spur, helical, bevel and worm gears, racks and sprockets), from one-off and prototype parts to high-volume production. Machining is carried out in-house, to an ISO 9001 approved standard, for customers in sectors including oil and gas, rail, construction, utilities and mining.
CNC Milling
CNC Turning
Assembly
Prototyping
Edmo Limited
Ross-on-Wye, Herefordshire
Aluminium extrusion, fabrication and finishing company based in Ross-on-Wye, Herefordshire, established in 1978. Services include multi-axis CNC machining of aluminium extrusions and castings, precision saw cutting, section bending, anodising, powder coating, laser etching, CAD and prototyping, and component assembly, for defence, aerospace, automotive, construction and renewable energy customers.
CNC Milling
Metal Finishing
Assembly
Prototyping
Edwards Precision Ltd
High Wycombe, Buckinghamshire
Edwards Precision Ltd is a family-owned and run precision engineering and machining subcontractor at Cressex Business Park, High Wycombe. The company runs CNC lathes, vertical machining centres, a Matsuura 5-axis machining centre and a Doosan 9-axis mill/turn machine, with a temperature-controlled CMM inspection room and in-house CAD/CAM. It works with materials from plastics to exotic alloys, serving clients in the motorsport and water purification sectors, and operates to ISO 9001:2015.
CNC Milling
CNC Turning
5-Axis Machining
Design/CAD-CAM
Elder Engineering (Herts) Limited
Welwyn Garden City, Hertfordshire
Elder Engineering (Herts) Ltd is a Welwyn Garden City-based precision subcontract machining company, established in 1980 as an engineering plastics supplier and later expanded into CNC metal machining. It operates 5-axis and 3/4-axis CNC machining centres, CNC turning centres with live tooling, CNC routers, in-house CAD/CAM, CMM inspection and a Stratasys 3D printer, machining aluminium, stainless steel, mild steel, brass, copper, titanium and Inconel alongside engineering plastics. Finishing options include bead blasting, anodising and powder coating. Customers include aerospace, medical, automotive and food packaging companies. It holds AS9100D and ISO 9001:2015 certification and also runs separate divisions for high-performance tapes, sponge and rubber, and X-ray test pieces.
CNC Milling
CNC Turning
5-Axis Machining
Design/CAD-CAM
Engineering Concepts (Bury) Limited
Bury St Edmunds, Suffolk
New
Engineering Concepts (Bury) Limited is a CNC machining and fabrication company in Bury St Edmunds, Suffolk, opened in 2010. CNC milling (travels 1000 x 600 x 600 mm) and CNC turning (up to 550 mm diameter by 750 mm long) run on Siemens SINUMERIK 828D controls, with off-line 3D CAD/CAM programming and tolerances to 0.01 mm. The company also offers sheet metal work, MIG, TIG and MMA welding, assembly including clean room medical goods, and prototype and product development, with finishes such as powder coating, anodising, zinc and electroless nickel plating and hardening available. It works in mild steel, stainless steel, aluminium, brass, copper and engineering plastics.
CNC Milling
CNC Turning
Sheet Metal Fabrication
Welding & Fabrication
ES
Engineering Systems (Nottm) Limited
Nottingham, Nottinghamshire
New
Engineering Systems (Nottm) Limited is a Nottingham company that designs and builds small mechanical strength testing machines and offers subcontract design and manufacturing. Its workshop has CNC machining centres and lathes from Haas and Hardinge, including a 4-axis mill and a lathe with driven tooling, alongside conventional machines, producing one-off prototypes and low to medium volumes of precision components. Parts are designed in Solid Edge, programmed in OneCNC and finished in a vibratory deburring machine.
CNC Milling
CNC Turning
Metal Finishing
Design/CAD-CAM
Engineering Technologies & Manufacturing Ltd
Northampton, Northamptonshire
New
Engineering Technologies & Manufacturing Ltd is a subcontract CNC machining company in Northampton, Northamptonshire. It offers CNC turning, vertical and horizontal milling, 5-axis milling with robot-loaded pallets, Swiss turning up to 20mm diameter, wire and spark erosion, and CNC grinding, with a CNC CMM for measurement and a 5-axis laser for marking and engraving. Work ranges from small batches to large batches of precision components.
CNC Milling
CNC Turning
5-Axis Machining
Swiss Machining
Ens Precision Engineering Ltd
Rotherham, South Yorkshire
ENS Precision Engineering Ltd is a family-run subcontract CNC machining company based in Maltby, Rotherham, offering CNC turning and CNC milling from a fleet of Doosan and Haas machines. The company serves customers across a range of industries throughout the UK, with a focus on right-first-time quality backed by first-off, batch and final inspection procedures. It has pursued continuous investment in new CNC equipment.
CNC Milling
CNC Turning
Epal Engineering Ltd
Storrington, West Sussex
New
Epal Engineering Ltd is a CNC machining and toolmaking company in Storrington, West Sussex. It runs Haas VF1 and VF2 SS and Mikron UME 560 CNC milling machines, Haas SL20 and Pinacho Mustang lathes, three wire erosion machines (Robofil and Charmilles) and three Hurco spark erosion machines. The company machines steel, stainless steel, hardened tool steel, aluminium, titanium, brass, copper and plastics, makes mould and press tools, and provides CAD design, reverse engineering, prototyping, coded welding, assembly and inspection reports. Customers include aerospace, defence, marine, oil and gas, rail and medical firms.
CNC Milling
CNC Turning
Wire EDM
Sinker EDM
ESL Engineers (Basildon) Limited
Basildon, Essex
New
ESL Engineers (Basildon) Limited is a precision machining company in Basildon, Essex. It runs 3, 4 and 5-axis CNC milling machines, CNC turning centres including sliding head lathes and mill/turn machines, and gear cutting, with inspection on Mitutoyo coordinate measuring machines. The company is registered to AS9100 Rev D and ISO 9001 and supplies aerospace, space, defence, oil and gas, communications, automotive and marine customers. It is part of a group that includes Robert Pringle Engineers at the same address.
CNC Milling
CNC Turning
5-Axis Machining
Swiss Machining
Eurotubes Uk Limited
Portland, Dorset
Eurotubes UK manufactures precision wire guide tubes, motor winding needles and soldering equipment for the coil and motor winding industries, and separately offers CNC milling, CNC turning, Swiss-type turn-mill and wire EDM as a subcontract machining service to wider industries. The Portland, Dorset-based company also provides CAD design and reverse engineering of OEM parts, with heat treatment, polishing/lapping, honing, grinding, laser marking and CMM inspection in-house, and fast-turnaround and prototype-to-volume capability.
CNC Milling
CNC Turning
Swiss Machining
Wire EDM
Exact CNC (NI) Ltd
Newry, County Down
New
Exact CNC (NI) Ltd, trading as The Exact Group, is a CNC machining and finishing company in Newry, County Down, working from a 72,000 sq ft site with over 70 CNC milling and turning machines. Milling covers 3-axis machining centres and six 5-axis machines, and turning ranges from 2 and 3-axis lathes to 4, 5 and 9-axis turn-mills and sliding head machines. Parts are measured on a Hexagon CMM and a Faro Arm. The company is certified to ISO 9001, AS9100 and ISO 13485, and also provides anodising, powder coating, painting, assembly and a rapid response service for aerospace, space, defence, automotive, medical, energy and marine customers.
CNC Milling
CNC Turning
5-Axis Machining
Swiss Machining
Expert CNC Limited
Verwood, Dorset
New
Expert CNC Limited is a CNC milling and turning company in Verwood, Dorset, founded in 2008. It machines components on Bridgeport and Dugard milling machines and on Mazak twin-spindle and XYZ ProTurn lathes, and also offers mechanical and electro-mechanical assembly with testing, and fixture and tooling design and manufacture. It supplies customers in Dorset, Hampshire, Wiltshire, Devon and the south of the UK.
CNC Milling
CNC Turning
Assembly
Design/CAD-CAM
Expert Precision Engineering Ltd
Newcastle Upon Tyne, Tyne and Wear
New
Expert Precision Engineering Ltd is a CNC machining company at Longbenton, Newcastle upon Tyne, established in 2018 and running a 24-hour double shift from Monday to Friday. Its plant includes six CNC lathes (three with live tooling), four CNC milling machines with 4th-axis attachments on three, three DMG 5-axis machining centres and Fanuc wire and spark erosion machines, working materials from plastics to nickel alloys for prototypes and production runs. Inspection uses two CMMs, and magnetic particle and liquid penetrant testing is carried out in-house by PCN Level 3 qualified inspectors. Final assembly is offered, with coatings and painting arranged through its supply chain, for aerospace, defence, oil and gas, renewables, automotive, motorsport and marine customers.
CNC Milling
CNC Turning
5-Axis Machining
Wire EDM
Express Engineering (Gateshead) Limited
Gateshead, Tyne and Wear
Express Engineering is a Gateshead-based manufacturer of turnkey precision-machined products and assemblies for the subsea equipment and offshore energy sector, operating over 100 CNC machine tools alongside material sourcing, Corrosion Resistant Alloy (CRA) cladding, butt welding, assembly and test under one roof. Machining covers CNC turning, vertical boring and horizontal milling/boring, CMM inspection and NDT services. The company runs a dedicated assembly and test facility with hydrostatic and submerged gas testing capability up to 20,000psi, and has invested over £20 million in its facilities over the past decade. Its quality, environmental and health & safety management systems are certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001.
CNC Milling
CNC Turning
Welding & Fabrication
Assembly
FDi Engineering Limited
Winfrith Newburgh, Dorset
New
FDi Engineering Limited is a precision engineering company at Dorset Innovation Park, Dorset, offering CNC milling, turning and grinding, fabrication and welding, and mechanical fitting and assembly. CNC equipment includes HAAS and Mori Seiki lathes, Bridgeport and Mach vertical machining centres and a Huffman 5-axis grinder, with CMM inspection and tolerances down to ±0.0025mm. The company is certified to ISO 9001, ISO 14001, ISO 27001 and ISO 45001 and is JOSCAR registered, and supplies defence, marine, automotive, medical, electronics and oil and gas customers, from prototypes to production runs.
CNC Milling
CNC Turning
Sheet Metal Fabrication
Welding & Fabrication
Ferrybridge Workshops Ltd
Knottingley, West Yorkshire
New
Ferrybridge Workshops Ltd is a subcontract engineering company in Knottingley, West Yorkshire, operating from a 160,000 sq ft site. It machines components from a few millimetres in size to shafts and rotors up to 17 metres long and 120 tonnes, using CNC lathes, a DMU 100 5-axis machine, 4-axis milling machines, CNC and manual horizontal and vertical borers, and surface and cylindrical grinders. It also re-engineers components from samples and offers NDT including phased array ultrasonic, magnetic particle and dye penetrant testing. The company is ISO 9001 certified and JOSCAR registered, and supplies power generation, aerospace, defence, automotive, medical and oil and gas customers.
CNC Milling
CNC Turning
5-Axis Machining
Reverse Engineering
Field Engineering (Poole) Limited
Poole, Dorset
New
Field Engineering (Poole) Limited is a subcontract machining and fabrication company in Poole, Dorset, established in 1968. It runs Hurco 3- and 4-axis CNC machining centres and Doosan CNC turning centres with live tooling, and offers sheet metal and pipework fabrication, coded welding, assembly, hydraulic pressure testing and in-house painting. Parts are inspected on a Tesa CMM with CMM and first article reports. The company is certified to ISO 9001:2015 and supplies marine, oil and gas, medical and defence customers.
CNC Milling
CNC Turning
Sheet Metal Fabrication
Welding & Fabrication
Flintshire Precision Engineering Ltd
Deeside, Flintshire
Flintshire Precision Engineering Ltd is a precision machining company based on Deeside Industrial Park in North Wales. It provides CNC turning and high-speed 3 and 5-axis CNC milling, alongside conventional manual machining, surface grinding, welding, and CMM inspection. The company also supports customers through product development from concept to production, including prototyping, reverse engineering, and the design and manufacture of tooling such as jigs, fixtures and press tools, plus anodising and chemical blacking finishing. Materials include titanium, nickel alloys, copper alloys and plastics. It holds BSI ISO 9001:2015 certification and serves aerospace, oil & gas, automotive and alternative energy customers.
CNC Milling
CNC Turning
5-Axis Machining
Welding & Fabrication
FE
Forestheath Engineering Limited
St. Leonards on Sea, East Sussex
Forestheath Engineering Ltd is an independent engineering company based in St. Leonards-on-Sea, East Sussex, serving Sussex and the South East. The company runs a machine shop with both CNC and manual machines, offering turning, milling, drilling, grinding and thread/screw cutting for one-off jobs, prototypes and batch production, alongside fabrication (gates, railings, structural steelwork, sheet metal work) and MIG/TIG/ARC/gas welding and brazing. It also carries out on-site repairs, maintenance and installations, pump refurbishments and motor-trade engineering such as cylinder head refacing, valve grinding and brake disc/drum refacing.